Fusing Molds from Dragon Glass

Cat. No. 31-1040 – Square Snack Plate, 2 Half Moon – 12” x 12” x 0.6”

·        The molds all come pre-drilled, with the holes positioned to give optimum slumping results. These holes are made in the “green-ware”, so as not to stress the clay shape after it has been fired.

·        The molds all have a wide rim at the top, to enable correct placing of the glass piece. This ensures even forming, and correct proportions to the finished articles.

·        Due to the nature of the materials used for making the molds and the method of forming, a small difference in finished size can be expected from time to time. Please check the size of molds before cutting glass. Glass should not be larger that the mold.

3 Unique Features

• A raised skirt around the mold which raises the bottom of the mold off the kiln shelf, thus allowing even circulation of heat all round the mold and glass as its slumping.
• Cut-out “handles” on each side of the skirt to facilitate easy lifting in and out of the kiln, and also to let heat circulate beneath the mold.
• A Foot Ring ensures that each piece of glass formed has a nicely finished base, with an evenly formed ring to give it stability and a professional appearance.